
Function Mode and Adjustment
6
6.5S mode Operations
6.5.1 S1: Auto Reset
Setting changes made to the control panel that are not used within 60 seconds of being input are automatically cancelled and the system reverts back to the original settings.
Display | setting | Function |
S1 | *d0 | Enable (60 seconds) |
| d1 | Disable |
|
|
|
6.5.2 S2: Auto Power Save
Turns the Printer's fuser OFF if the system is left idle for a specific period of time.
* 200V units operate on a default 30 minute Auto Power Save setting.
Display | setting | Function | |
S2 | *d0 | Disable |
|
| d1 | Enable | (30 minute after) |
| d2 | Enable | (60 minute after) |
|
|
|
|
6.5.3 S3: Auto Projection Lamp OFF
Turns the Scanner's Projection Lamp OFF if the system is left idle for a specified period of time.
Display | setting | Function |
S3 | *d0 | Disable |
| d1 | Enable (30 minute after) |
| d2 | Enable (60 minute after) |
|
|
|
6.5.4 S4: Coin Vender / Foot Switch Setting
When you equip this system with the coin vender (option) or Foot Switch (option), select the d1(d2) or d3.
Display | setting | Function |
S4 | *d0 | Disable |
| d1 | Enable (Coin Vender) |
| d2 | Enable (Coin Vender) |
| d3 | Enable (Foot Switch) |
|
|
|
*d1 and d2 are the same functions.
85