assembly
WARNING:
Stop the engine and disconnect the spark plug wire |
| |
before installing parts, making adjustments, cleaning, or |
| |
when not in use. Failure to do so could result in possible | blower tube | |
serious personal injury. | ||
|
installing THE BLOWER TUBE
See Figure 2.
Align the raised tabs on the main blower housing to the slots on blower tube; slide together and rotate tube clockwise to secure.
To remove, rotate the blower tube counterclockwise to
release.
blower housing
Fig. 2
instalLING THE handle
See Figure 3.
Place unit on a flat level surface.
Insert handle into the hole on the base of the blower until the handle is fully seated.
Insert handle knob and rotate clockwise to secure.
Installing the vacuum bag
See Figure 4.
Rotate the blower tube counterclockwise and remove.
Place the neck of the vacuum bag over the blower housing outlet until the drawstring area rests between the raised ribs.
Squeeze the sides of the fastener with one hand while drawing the string tightly with the other until the bag is securely attached.
Rotate the vacuum bag until the shoulder strap is upright.
Make sure the vacuum bag is zipped and closed before starting the unit.
handle
hole
handle |
|
knob | Fig. 3 |
| drawstring |
shoulder
strap
fastener
| raised |
vacuum | ribs |
| |
bag | Fig. 4 |
Page