features
KNOW YOUR CHAIN SAW
See Figure 1.
Before attempting to use this product, familiarize yourself with all operating features and safety rules.
CHOKE LEVER
The choke lever opens and closes the choke valve in the carburetor. Positions available include FULL CHOKE, HALF CHOKE, and RUN.
combination wrench
A combination wrench tool is provided for use when per- forming various maintenance procedures.
front hand guard / CHAIN BRAKE
The chain brake is designed to quickly stop the chain from rotating. When the front hand guard/chain brake is pushed toward the bar, the chain should stop immediately. The chain brake does not prevent kickback.
GUIDE BAR
The
LOW KICKBACK SAW CHAIN
The low kickback saw chain helps minimize the force of a kickback reaction by preventing the cutters from digging in too deeply at the kickback zone.
primER bulb
The primer bulb pumps fuel from the fuel tank to the car buretor.
The
THROTTLE lock
The throttle lock feature allows you to start the chain saw without having to continuously hold the throttle trigger.
THROTTLE TRIGGER
The throttle trigger is used for starting the chain saw, and also for controlling chain rotation.
assembly
UNPACKING
This product has been shipped completely assembled.
nCarefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.
nInspect the tool carefully to make sure no breakage or damage occurred during shipping.
nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.
nIf any parts are damaged or missing, please call
PACKING LIST
Chain Saw
Scabbard
Combination Wrench
Operator’s Manual
Case
WARNING:
If any parts are missing do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.
WARNING:
Do not attempt to modify this tool or create accesso- ries not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
NOTE: The chain saw has been fully factory tested. It is normal to find some slight oil residue on the saw. Read and remove all hang tags and store with the Operator’s Manual.
Page
