Homelite UT13118 Adjusting Handle, Installing Side Discharge Deflector, Assembly, See Figure

Models: UT13120 UT13118

1 22
Download 22 pages 58.33 Kb
Page 10
Image 10
ADJUSTING HANDLE

ASSEMBLY

WARNING:

HANDLE KNOBS

Never operate the mower without the proper safety devices in place and working. Never operate the mower with damaged safety devices. Failure to heed this warning can result in serious personal injury.

ADJUSTING HANDLE

See Figure 3.

Fully loosen the handle knobs on both sides of the handle.

Pull up and back on the upper handle to raise the handle into operating position. Make certain the handles snap into place securely.

Tighten the handle knobs on both sides of the handle to secure.

UPPER

HANDLE

UPPER LOWER

HANDLE

Fig. 3

INSTALLING SIDE DISCHARGE DEFLECTOR

See Figure 4.

Lift the side discharge door.

Align the grooves on the deflector with the pins on the underside of the door.

Lower the deflector until the hooks on the mower deck are secured in the openings in the deflector.

Release the deflector and door.

PINS

SIDE

DISCHARGE

DOOR

GROOVE

INSTALLING THE MULCHING PLUG

(MODEL UT13120 ONLY)

See Figure 5.

NOTE: When using the mulching plug, do not install either the side discharge deflector or the grass catcher.

Lift the rear discharge door.

Grasp the mulching plug by its handle and tilt at an approximate 15 degree angle.

Insert the plug into the rear discharge opening.

Lower the rear discharge door.

HOOKS

OPENINGS

GROOVE

SIDE DISCHARGE

 

DEFLECTOR

Fig. 4

MODEL UT13120 ONLY

REAR

DISCHARGE

DOOR

 

 

REAR

 

 

DISCHARGE

HANDLE

 

OPENING

MULCHING

 

 

 

 

PLUG

Fig. 5

Page 10

Page 10
Image 10
Homelite UT13118 Adjusting Handle, Installing Side Discharge Deflector, Installing The Mulching Plug, Assembly, See Figure