OWNER’S MANUAL
cleaning and maintenance
Continued
SHARPENING SAW CHAIN
WARNING: Unplug chain saw from power source before servic- ing. Severe injury or death could occur from electrical shock or body contact with moving chain.
Sharpening Cutters
Use file guide for 30° filing.
1.Adjust chain for proper tension (see Saw Chain Tension Adjustment, page 7).
2.Clamp guide bar in vise to hold saw steady. Note: Do not clamp chain.
3.Press 5/32" round file (attached to file guide) into groove between top plate and depth gauge on chain. File guide should rest on both top plate and depth gauge (see Figures 19 and 20). Note: File at midpoint of guide bar.
4.Hold file guide level. Make sure 30° mark on file guide is parallel to center of guide bar (see Figure 19). This will in- sure that you file cutters at 30° angle.
5.File from inside towards outside of cutter until sharp. Only file in this one direction (see Figure 19). Note: Two or three strokes with file should sharpen cutter.
6.After each cutter is sharpened, move chain forward to sharpen next cutter. File all cutters on one side of chain.
7.Move to other side of chain and repeat process.
WARNING: Cutting edges on chain are sharp. Use protective gloves when handling chain.
Keep chain sharp. Your saw will cut faster and more safely. A dull chain will cause undue sprocket, guide bar, chain, and motor wear. If you must force chain into wood and cutting creates only sawdust with few large chips, chain is dull.
Items Needed to Sharpen Chain
30° Guide Mark 
Filing
Direction
File
Guide
5/32" 
Round File
Purchase these items from your local dealer, hardware store, or chain saw sup- plies outlet.
•5/32" round file
•Depth gauge tool
•File guide
•Vise
•Medium sized flat file
Note: This illustration shows file guide placement and filing direction for sharpening cutters on left side of chain.
Figure 19 - File and File Guide Placement On Chain |
| |
Groove |
| |
Depth Gauge |
| |
(left side of chain) | Depth Gauge | |
Left Side of | ||
(right side | ||
Chain | ||
of chain) | ||
Groove | ||
| ||
Top Plate | Top Plate | |
(right side of chain) | ||
(left side of chain) | ||
| ||
Right Side of |
| |
Chain |
|
Figure 20 - Chain Part Locations
Continued
120693 | 13 | For more information, visit www.desatech.com |
