Manuals / Homelite / Lawn and Garden / Pressure Washer

Homelite UT80432 Applications, Adding Lubricant to the Engine, Oxygenated Fuels

Models: UT80432

1 52
Download 52 pages 51.67 Kb
Page 14
Image 14

OPERATION

APPLICATIONS

You may use this product for the purposes listed below:

Removing dirt and mold from decks, cement patios, and house siding

Cleaning cars, boats, motorcycles, outdoor furniture, and grills

nInsert a clean funnel into the fuel tank then slowly pour gasoline into the tank. Fill tank to approximately 1-1/2 in. below the top of the tank neck (this allows for fuel expansion).

nReplace fuel cap and tighten until the cap “clicks”.

nClean up any spills before starting the engine.

ADDING LUBRICANT TO THE ENGINE

See Figure 11.

NOTE: This machine has been shipped with approximately 2 oz. of lubricant in the engine from testing. You must add lubricant to the engine before starting it the first time.

CAUTION:

Any attempt to start the engine without adding lubricant will result in engine failure.

nPlace pressure washer on a flat, level surface.

nUnscrew the oil cap / dipstick by turning counter- clockwise.

nUsing 4-stroke engine lubricant (SAE 30 or SAE 10W30), add engine lubricant until the fluid level rises to the up- per portion of the hatched area on the dipstick (18 oz., 4-cycle engine lubricant provided). Do not overfill.

nReplace the oil cap / dipstick and securely tighten. NOTE: This engine has a total lubricant capacity of 20.3 oz.

WARNING:

Always shut off engine before fueling. Never add fuel to a machine with a running or hot engine. Move at least 30 ft. from refueling site before starting engine. Do not smoke and stay away from open flames and sparks! Failure to follow these instructions could result in serious personal injury.

STARTING AND STOPPING THE PRESSURE WASHER

See Figures 13 - 14.

CAUTION:

Do not run the pressure washer pump without water sup- ply connected and turned on, as this may damage the high pressure seals and decrease pump life. Completely unwind the hose from its reel or coil and make sure the hose is not being restricted by tires, rocks, or any other objects that may lessen or prevent water flow to the pressure washer.

OXYGENATED FUELS

DO NOT USE E85 FUEL. IT WILL VOID YOUR WARRANTY.

NOTE: Fuel system damage or performance problems re- sulting from the use of an oxygenated fuel containing more than the percentages of oxygenates stated below are not covered under warranty.

Ethanol. Gasoline containing up to 10% ethanol by volume (commonly referred to as E10) is acceptable. E85 is not.

ADDING GASOLINE TO THE FUEL TANK

See Figure 12.

WARNING:

Gasoline and its vapors are highly flammable and explosive. To prevent serious personal injury and prop- erty damage, handle gasoline with care. Keep away from ignition sources, handle outdoors only, do not smoke while adding fuel, and wipe up spills immediately.

When adding gas to the pressure washer, make sure the unit is sitting on a flat, level surface. If the engine is hot, let the pressure washer cool before adding gas. ALWAYS fill the fuel tank outdoors with the machine turned off.

NOTE: Use unleaded gas only. DO NOT mix lubricant with gas.

nBefore removing the fuel cap, clean the area around it. Remove the fuel cap.

Before starting the engine:

Connect all hoses.

Check all fluids (lubricant and gas).

Turn on the garden hose then squeeze the trigger to relieve air pressure; hold the trigger until a steady stream of water appears.

To start the engine:

Turn the fuel valve to the ON position.

Put the on/off switch in the ON position.

Pull choke out to the START position.

Grasp the starter grip and rope and pull slowly until resis- tance is felt. Give the starter grip and rope a short, brisk pull to start the engine.

NOTE: Do not allow the starter grip and rope to snap back after starting; return it gently to its original place.

CAUTION:

If the engine does not start after each pull of the starter grip and rope, squeeze the trigger to relieve water pres- sure before attempting to start the engine again.

Let engine run for several seconds, then push choke in to the RUN position.

Page 10 — English

Page 13 Page 15
Page 14
Image 14
Homelite UT80432 Applications, Adding Lubricant to the Engine, Starting and Stopping the Pressure Washer, Oxygenated Fuels
Page 13 Page 15

UT80432 specifications

The Homelite UT80432 is a powerful and versatile electric chainsaw designed for homeowners and DIY enthusiasts who require a reliable tool for cutting and trimming tasks around the yard. As a part of the Homelite lineup, this chainsaw combines innovative technologies with user-friendly features, making it an ideal choice for both novice and experienced users.

One of the most notable features of the UT80432 is its robust 8-amp motor. This powerful engine provides ample cutting strength, allowing users to tackle various tasks such as pruning branches, cutting firewood, or handling small to medium-sized trees. The chainsaw's design focuses on efficiency, enabling users to make swift and precise cuts with minimal effort.

The UT80432 is equipped with a 12-inch cutting bar and chain, which strikes an excellent balance between maneuverability and cutting capacity. This length is suitable for a variety of applications, ensuring that users can perform their tasks effectively without being overwhelmed by the size and weight of the tool. Its lightweight construction further enhances usability, making it easy to carry and operate for extended periods.

Safety is a paramount concern in any power tool, and the Homelite UT80432 doesn't fall short in this aspect. It features a chain brake that immediately halts the chain's operation in the event of kickback, providing an additional layer of protection for users. Additionally, the chainsaw includes a safety switch to prevent accidental starts, ensuring peace of mind during operation.

Another key characteristic of the UT80432 is its tool-free chain tensioning system. This feature simplifies the process of adjusting the chain tension, making it easier for users to maintain optimal performance without the need for specialized tools. The clear viewing window for the oil reservoir allows users to easily monitor oil levels, which helps prolong the life of the chain and bar.

The chainsaw is further designed with ergonomic considerations. Its cushioned handle ensures a comfortable grip, reducing user fatigue during prolonged use. The overall weight distribution of the unit contributes to better control and stability, which fosters greater precision during cutting tasks.

In summary, the Homelite UT80432 is an efficient and user-friendly electric chainsaw that stands out due to its powerful motor, lightweight design, safety features, and easy maintenance capabilities. It is a practical addition to any homeowner's toolkit, particularly for those looking to manage their outdoor spaces effectively and safely.