7. OPERATION ENGINE COVER GRIP
TILT LEVER
3. Put the tilt lever in the TILT posi-
tion. Use the engine cover grip and
raise the motor to either the 30”, 45”
or 75” tilt position.
With the motor tilted up:
l Operate the boat at low speed.
l Do not operate in reverse.
l Monitor the cooling system
indicator for water discharge. Be
sure that the motor is not tilted so
high that the water intakes are out
of the water.
54
75” (when mooring) 450 30” (when cruising in
shallow water)
4. To return the motor to the normal
RUN position, move the tile lever
away from you until it stops. Tilt the
motor up slightly, then lower the
motor slowly until it locks with the
transom angle adjusting rod. During
cruising, the motor must always be in
the normal run position.
Reverse Operation:
The tilt lever must be in the RUN
position with the motor locked to
+e transom angle adjusting rod. If
the motor is operated in reverse
with the tilt lever in the TILT
position and/or the motor is in one
of the three tilt angle positions, the
motor is free to tilt up.