12. STORAGE For longer service life of the outboard
motor, have your outboard motor
serviced by an authorized Honda
Marine or Honda Outboard Motor
dealer before storage.
If you are unable
to
take the motor to
-your dealer, proceed as follows:
Draining the Carburetors
Be careful not to spill gasoline. Spilled
gasoline or gasoline vapor may ignite.
If any gasoline is spilled, make sure the
area is dry before storing or transporting
the motor. Do not smoke or allow flames
or sparks where gasoline is drained or
stored.
extremely flammable, and
gasoline vapor can explode,
causing serious injury or death.
Do not smoke or allow flames
or sparks in your working area.
KEEP OUT OF REACH OF
CHILDREN.
90 DtiIN SCREW
1. Disconnect the
fuel hose connector.
2. Pull the #3 carburetor dram hose
outside of the motor pan.
3. Loosen the dram screw of the #3
carburetor and drain the carburetor.
Catch the draining gasoline in an
approved gasoline container.
4. Dram the #l and #2 carburetors in
the same manner using the #3 car-
buretor drain hose.
#I CARBURETOR
DRAIN SCREW
#2 CARBURETOR
DRAIN SCREW
#3 CARBURETOR
DRAIN SCREW
dRAIN HOSE
5. After thoroughly draining the car-
buretors, tighten the dram screws
securely.
6. Reinstall the drain hose back on the
#3 carburetor.