CONTROLS & FEAlJURES Transom Angle Adjusting Bolt
The transom angle adjusting bolt is
used to adjust the angle of the out-
board motor in the normal operating
position (see page 21).
Loosen the wing nut to free the
adjusting bolt.
Adjust the angle of the outboard
motor, and tighten the wing nut. Be
sure that the bolt head and wing nut
are seated in one of the four re-
cesses in the adjustment slot.
Fuel Cap Vent Knob
The cap is provided with a vent
knob to seal the fuel tank. Open the
fuel vent by turning the vent knob 2
or 3 turns counterclockwise before
operating the outboard motor (see
page 25).
ADJlJSTlNd BOLT AND WING NUT
VENT KNOB \
FUEL FILLER CAP
76