SERVICING YOUR HONDA OUTBOARD MOTOR
ENGINE OIL CHANGE Drain the used oil while the engine is warm. Warm oil drains quickly and
completely.
1. Move the fuel valve lever to the OFF position, and turn the fuel cap vent
knob clockwise to close the fuel vent.
2. Loosen the oil drain bolt, and turn the motor on its tiller handle side.
3. Remove the oil drain bolt and washer to drain the oil.
Improper disposal of engine oil can be harmful to the environment. If you
change your own oil, please dispose of the used oil properly. Put it in a
sealed container, and take it to a recycling center. Do not discard it in a trash
bin or dump it on the ground.
4. Stand the outboard motor in a vertical position, and install a new washer
and the oil drain bolt securely.
5 Remove the engine cover.
6. Remove the oil filler cap and fill the crankcase with the recommended oil
(see page 45) up to the upper limit mark on the oil level inspection window.
7. Install the oil filler cap and tighten it securely.
8. Install the engine cover.
Engine oil capacity: 0.26 US qt (0.25 J?, 0.22 Imp qt)
L LEVEL INSPECTION
OIL DRAIN BOLT
44