43
Spark Arrester Maintenance
SPARKARRESTER
SPARKARRESTER SCREEN SCREW
Check that the spark plug washer is in good condition, and thread
the spark plug in by hand to prevent cross-threading.
Afterthesparkplugisseated,tightenwithasparkplugwrenchto
compress thewasher.
If installing a new spark plug, tighten 1/2 turn after the spark plug
seats to compress the washer. If reinstalling a used spark plug,
tighten 1/8 1/4 turn after the spark plug seats to compress the
washer.
Install the spark arresterin the reverse order of removal.
If the generator has been running, the muffler will be very hot. Allow it
to cool before proceeding.
Use a brush to remove carbon deposits from the spark arrester
screen.
Inspect the screen for breaks or tears and replace it if necessary.
Clean the spark arresteras follows:
Loosen the screw by the exhaust port of the muffler and remove the
spark arrester.
The spark plug must be securely tightened. An improperly tightened
spark plug can become very hot and could damage the engine.
Never use spark plugs which have an improper heat range. Use only
the recommended spark plugs or equivalent.
The spark arrester must be serviced every 100 hours to maintain its
efficiency.
6.
7.
1.
2.
3.
03/03/27 14:24:56 31Z22600_044