Honda Power Equipment EB6500X

Hanger Kit Installation

HANGER

GENERATOR

SIDE

HANGERBRACKET (2)

8 16mm FLANGE BOLT (4)

280mm (11 in)

Position the hanger at the generator’s balance point as shown below.

Fit the end tabs of the hanger through the bracket slots, and bolt the

brackets to the hanger and tighten securely.

03/03/27 14:27:29 31Z22600_058

Contents

Main Page Page IMPORTANT SAFETY INFORMATION GENERAT OR SAFET Y . 3 CONTENTS Page Page Page Page 8 COMPONENT IDENTIFICATION CONTROL PANEL Page 10 CONTROLS Page Page Page Page Page Page Page Page Page 20 GENERATOR USE Page Page Page Page Page Page Page 28 PRE-OPERATION CHECK Page Running the engine with persistent spark knock or pinging can cause engine damage. Distributors Limited Warranty 31 STARTING THE ENGINE/STOPPING THE ENGINE 32 MAINTENANCE Page Page Page Page Emission Control Warranty Maintenance Schedule REGULARSERVICE PERIOD (3) Page Never run the generator without the air filter. Rapid engine wear will result. Page Page Page Page Page Page 47 TROUBLESHOOTING Page Page Page 51 SPECIFICATIONS Page Page 54 ASSEMBLY Page Unpacking Loose Parts (Wheel kit, hanger and handle) Tools Required: 1. 2. 14 mm wrench (2), pliers Page Page Page Page Page 62 WARRANTY SERVICE INFORMATION 63 INDEX