28
OPERATION
AC OPERATION
OVERLOADINDICATOR
(RED)
OUTPUTINDICATOR
(GREEN)
PLUG
Start the engine (see page )
and make sure the output
indicator (green) comes on.
Turn on the appliance.
Determine if the cause is a shortcircuit in a connected appliance or an
overload. Correctthe problem and restart the generator.
Before connecting an appliance to the generator, makesure that the
appliance is in good working order and thatits electrical rating does
not exceed that of the receptacle.
Plug an appliance into the
appropriate receptacle.
Most motorized appliances require more than their electrical rating for
startup. When an electric motoris started, the overload indicator (red)
may come on. This is normalif the overload indicator (red) goes off
within 9 seconds. If the overload indicator (red)stays on, consult your
generator dealer.
If the generator is overloaded (see page ), or if there is a short circuit
in a connected appliance, the overload indicator (red) will come on. If
the overload indicator (red)stays on continuously f or morethan 4
seconds, current to the connected appliance(s) willshut of f, and the
output indicator (green)will go off . Stop the engine and investigate
the problem.
1.
2.
3.
29
23
09/12/15 09:51:26 31Z28600_029