20
CONTROL & FEATURES
i-Monitor
i-Monitor at Startup
Display Backlight Flashes
i-Monitor Display
i-Monitor Display Mode1 Total OperatingHours
SINGLE-DIGIT
SCREENDISPLAY
FOUR-DIGIT
SCREENDISPLAY
i-MONITORBUTTON
TM
The i-Monitor is a user interface thatallows the operator to view (when
the generator is running) total operating time in hours, generator
output, engine RPM, battery voltage, and error messages. The
different display modes are selected by pressing the i-Monitorbutton.
During start up, the i-Monitordisplay and all three indicators will
simultaneously blink once. The condition of the i-Monitor display
and all threeindicators can be checked. Once the generator is
running, the Output indicator (green) and the i-Monitor display will
remain lit.
If the key is left in the ON position for over 30 seconds without starting
the engine, the display will startto flash.
The i-Monitor display is divided into two screens. The single-digit
screen displays the i-Monitor mode,which is represented by a number
1 through 4. The four-digit screendisplays the f ourmode values or
any activated error messages.
This mode displays the total operating hours of the generator.When
the generator is running, the total operating time accumulates. If the
total operating time is less than one hour,the numeric display will be
‘‘0.’’ When the operating time is one houror greater, the display will
be ‘‘1’’ or ‘‘2’’ and so on. Base the generator’smaintenance schedule
on the accumulated time displayed.
08/02/05 13:48:54 31Z25600_021