12. Secure the throttle cable and engine switch
wire harness to the upper handlebar and right
lower handlebar using the two tie straps as
shown.
13. Working on a level surface, tip the tiller on its
carrying handlebar as shown.
14. Remove the oil filler cap/dipstick.
15. Slowly add the recommended oil (included in
the box) to the bottom edge of the oil fill hole.
Do not overfill, as the engine oil tank capacity
is small.
Engine oil capacity: 3.4 fl oz (100 cc)
NOTICE

Running the engine with too little or too much

oil can cause engine damage.

16. Screw in the oil filler cap/dipstick securely.
17. Temporarily place the tine spacers and drag
bar in the owner’s manual bag.
Before using the tiller, all tiller operators must read
the following chapters:
•TILLER SAFETY (see page 4).
•
CONTROLS
(see page 7).
•
BEFORE OPERATION
(see page 10).
•
OPERATION
(see page 12).
TIE
STRAP (2)
OIL FILLER
CAP/DIPSTICK
OIL FILL
HOLE
CARRYING
HANDLEBAR
GenuineOil
10W30SJ
SAE
Initialfillforthe
NotforResale
FG100MINI-TILLER
OIL BOTTLE
(included in box)
OIL LEVEL
UPPER
LIMIT
DRAG
BAR
TINE
SPACER(2)
ASSEMBLY
FG100 TILLER 33