UNPACKING

1. Carefully remove the tiller and loose parts from the carton.

2. Remove the loose parts bag. Compare the loose parts with the inventory list below.

3. The tine spacers and drag bar will not be installed during assembly. Temporarily place the tine

spacers and drag bar in the owner’s manual bag.

Tools Required:

Phillips screwdriver, 7/16 and 9/16-inch wrenches and sockets and a torque wrench.

LOOSE PARTS

Check all loose parts against the following list. Contact your authorized Honda servicing dealer if any of the

loose parts shown below are not included with your tiller.

* The tine spacers are installed for narrow cultivating (see page 16).
** The drag bar is installed in place of the wheel assembly prior to tilling (seepage 9).
24 25

Ref. No Description Qty.

1 Upper handlebar 1
2 Right lower handlebar 1
3 Left lower handlebar 1
4 Right carry handlebar 1
5 Left carry handlebar 1
6 Handlebar grip 2
7 Wheel bar 1
8 Inner collar 2
9 Outer collar 2
10 Hex bolt, 3/8-16 x 8 inch 1
11 Washer 2
12 Lock nut, 3/8-16 1
13 Wheel 2

Ref. No Description Qty.

14 Clevis pin,5/16 x 7/8 inch 1
15 Lock pin 1
16 Lock nut, 1/4-20 3
17 Bolt, 1/4-20x 6 inch 2
18 Flange bolt, 1/4-20x 1-1/2 inch 1
19 Pipeplug 1
20 Handlebarbolt, 5/16-18 x 1-1/2 inch 2
21 Handlebarknob 2
22 Tie strap 2
23 Oilbottle 1
24* Tine spacer 2
25* * Drag bar 1
GenuineOil
10W30SJ
SAE
Initialfillforthe
NotforResale
FG100MINI-TILLER
1
10 11
13 14 15
16 17 18 19 20 21 22
23 24 25
2346
5
78912 Place with Owner's Manual
ASSEMBLY
FG100 TILLER 29