CONTROLS & EQUIPMENT
Transport Wheels
The transport wheels [1] are used to move the tiller around. | [2] |
| |
Before tilling, the transport wheels must be removed and the |
|
drag bar [4] installed in their place. |
|
Carrying Handle
Hold the carrying handle [2] when starting the engine. |
|
The carrying handle can be used to load/unload the tiller, and | [1] |
to assist in certain engine maintenance procedures. |
|
Recoil Starter Grip
Pulling the starter grip [3] operates the recoil starter to crank | [3] |
the engine for starting. |
|
Drag Bar
The drag bar [4] is used to control the forward action of the turning tiller tines. The drag bar can be adjusted to control the tilling depth of the tines.
[4]
Narrow Cultivating
The two outer tines can be removed to give you a narrower cultivating width. This gives you the ability to get between very closely spaced plants.
ENGLISH | 7 |
