SERVICING YOUR TILLER
Cooling Fin Inspection
Inspect the engine cooling fins [1]. Clean out any dirt and | [1] |
debris so air can flow across the cooling fins. |
1.Loosen the 5 mm hex bolt, then remove the fan cover.
2.Remove all dirt and debris from the cooling fins.
3.Install the fan cover and tighten the 5 mm hex bolt securely.
Throttle Cable Inspection
Verify that the throttle lever [1] operates smoothly, releases properly, and the throttle cable is undamaged. If there is visible damage, or if the throttle lever does not operate smoothly or release properly, take your tiller to your authorized Honda servicing dealer.
Carburetor Adjustment
A tachometer is required to adjust the idle speed. If you do not have one, have your authorized Honda servicing dealer adjust the idle speed.
1.Start the engine outdoors, and allow it to warm up to normal operating temperature.
2.Turn the throttle stop screw [1] to obtain a stable idle, below the speed at which the tiller tines begin to turn.
Standard Idle Speed: 3,100 ± 200 rpm
[1]
CHOKE LEVER
[1]
ENGLISH | 17 |
