OPERATING THE MOWER
Using the brake pedal: Partially pressing the brake pedal
causes the shift lever to move toward NEUTRAL. This
action causes the hydrostatic transmission to act as a
hydraulic brake and the riding mower slows down. Pressing
the brake pedal all the way down moves the shift lever fully
into the NEUTRAL position and applies a mechanical brake
to the rear wheels.
Adjusting Speeds (gear transmission models) Always use the clutch pedal before moving the shift lever
between any forward gears. If shifting between any forward
gear and REVERSE, use the clutch and brake pedals to
bring the riding mower to a full and complete stop.
Operating the shift lever on ;a sloped
surface can cause the riding mower to
lose traction.
The riding mower can tip over and you
can be killed or seriously injured.
Do not operate the shift lever while the
riding mower is on a sloped surface.
When shifting between forward speleds, always use the
clutch pedal and move to the next higher or lower gear. You
can start off from a complete stop when any gear is
selected.
Shifting From a Forward Gear to Another Forward Gear
1. Push the clutch pedal all the way down.
2. Move the shift lever to the desired gear position.
3. Gently release the clutch pedal.
4. You don’t need to bring the riding mower to a full stop if
shifting from one forward gear to another.
Shifting Between Any Forward Gear and Reverse
1. Press the clutch pedal all the way down, then press the
brake pedal all the way down to stop the riding mower.
2. Move the shift lever to the desired gear.
3. Gently release the brake pedal, then the clutch pedal.
34