OPERATING THE MOWER
Height of the Mower Deck To adjust the height of the
mower‘deck, grip the
mower deck height
adjustment lever firmly,
then slightly lift to clear the
notches in the handle guide.
Move the lever outward from the riding mower and away
from the handle guide. Raise or lower the lever to the
desired position. Move the lever into the position notch and
allow the weight of the lever to lock it onto the handle guide.
The mowing deck can be positioned in a range of equally
spaced heights: 1.0, 1.5, 2.0, 2.5, 3.0 and 3.5. These
numbers indicate the approximate cutting height in inches.
To prevent possible damage to the mower deck, always
raise it fully (3.5) when driving the riding mower to and from
the mowing area; this provides maximum ground clearance.
To avoid damaging or disabling the mower deck height
adjustment lever, never attempt to move the lever when the
riding mower is moving.
A higher cut may be needed to protect the lawn during the
hotter summer months. Consult a local nursery or lawn and
garden center for advice about specific types of grasses and
growing conditions in your area.
Most grasses should be cut when they have grown l/2 to 1
inch above the recommended height. If your grass grows
too tall, cut it back a little at a time, allowing a few days for
the grass to recover between mowings. Avoid cutting more
than one third of the total grass height in any one mowing.
41