- 4. Seat switch
NOTE: To make this inspec-
tion, it is necessary to start the
engine. Attach the spark plug
cap to the spark plug securely.
To start, refer to the pro-
cedures described on Page 47.
(I) Lock the parking brake and
put the main transmission
lever in NEUTRAL.
(2) Move the front and rear
P.T.0; levers OFF.
(3) Start the engine.
(4) Move the P.T.O. lever free
of either front or rear at-
tachment to ON position.
(5) Rise up slightly off the seat.
The engine should stop as
soon as your weight leaves
the seat.
(6) Return the front P.T.O.
lever to OFF and turn off
the ignition switch key.
(7) Repeat for rear P.T.O.
- 5. Oil pressure indicator light
NOTE: To make this inspec-
tion, it is necessary to start the
engine. Attach the spark plug
cap to the spark plug securely.
To start, refer to the pro-
cedures described on Page 47.
(1) Lock the parking brake and
put the main transmission
lever in NEUTRAL.
(2) Move the front and rear
P.T.O. levers OFF.
(3) Start the engine.
After starting the engine,
check the oil pressure indicator
light to see that it goes on, for
few seconds and then goes
out.
Return the ignition switch key
to OFF.
ON
ti -q+-. --.. i N OFF OFF
45