Hydraulic lift system
NOTE:
l
To make this inspection, it is necessary to start the engine; refer to the
procedures described on Page 47.
l
This inspection should be made with an attachment mounted on the
tractor.
l
The check procedure is the same for the front or rear attachment lifts.
Check either, by selecting the appropriate hydraulic cylinder selector
lever position.
(I 1 Start the engine.
(2) Set the hydraulic cylinder selector lever in FRONT or REAR (option).
(3) Move the lift lever to FAST or SLOW UP position, then release your
hand from the lever.
Check that the lift lever returns to NEUTRAL.
(4) Check that the attachment is lowered when the lift lever is moved
to the DOWN or SLOW DOWN position.
(5) Check the descent speed and adjust descent speed if necessary,
see page 27.
46