Adjusting the track tautness
If the tracks are not properly taut, they may slip off the wheels or their service
life may be markedly reduced.
Inspection
Check that the slackness is between 8-12 mm (0.31-0.47 in) when a force
(about 10 kg, 22.1 lb) is applied to the middle of the tracks.
8-12mm
(0.31 - 0.47 in)
Track adjustment
1. Tip up the carrier.
Loosen the two lock nuts until there is space between the nuts and the
frame.
2. Tighten the inner lock nut by hand until clearance between the lock nut and
frame is 5-l 0 mm. (0.20-0.39 in)
3. Hold the inner lock nut and tighten the other lock nut against it securely.
NOTE: Use the two 19 mm wrenches furnished with the power carrier as
illustrated. TRACK TENSION SPRING FRAME SURFACE