Tie-down hooks
Secure the load in the carrier bed with strong ropes or straps attached to the
tie-down hooks.
m Do not attach ropes or straps to locations other than the
tie-down hooks.
Side rails and side plates
The side rails may be extended up to 130 mm (5 inches) at each side for
carrying bulky, lightweight loads.
To extend the side rails, loosen the four lock bolts, pull both side rails out an
equal amount, then tighten the lock bolts securely.
To lower the side plates completely, extend the side rails then turn the lock pins
90 degress to right or left while pushing them down by hand.
SIDE RAIL LOCK BOLTS
p to 130 mm (5 in)
Return the side rails fully to the inner position for normal use.
side rails for use with lightweight loads only. A heavy load,
extended on the sides of the power carrier will increase the hazard of
overturning.
l Extend left and right side rails an equal amount, and center the load.
Do not extend the side rails more than is necessary to hold the load
and never more than 130 mm (5 inches) at each side.
24