6. Wheel removal
l
Do not attempt to remove a wheel unless the riding mower is on firm and
level ground.
l
Do not attempt to remove or replace a tire unless you have the equipment
and knowledge to do
SD
properly.
Block the wheels securely.
Front wheel
1. Remove the cotter pin.
2: Jack up the front of the mower and remove the 12 mm wheel hub nut,
washer and the front wheel.
3. Install the front wheel in the reverse order of removal.‘Be sure to use a new
cotter pin and bend it properly as shown.
Rear wheel
1. Remove the cotter pin.
2. Jack up the rear of the mower and remove the 14 mm wheel hub, washer
nut and the rear wheel.
3. Apply a thin coat of grease to the axle (splined portion) before installing the
4 rear wheel.
Install the rear wheel in the reverse order of removal. Be sure to use a new
cotter pin and bend it properly as shown.
[JACK POINTS]
FRONT REAR
COTfER PIN
46