Clogged cutter deck discharge chute.
1. Wrong blades * Use genuire Honda blades or equivalent.
2. Deck too low. + Raise deck and adjust deck height
properly.
3. Engine overloaded: + Operate at full throttle. Use lower speed
range. Set cutter deck higher than
desired height for first pass, then cut to
desired height on second pass.
4. Grass bags full * Empty grass bags.
. (Optional part).
Blades do not rotate or stop.
1. Blade belt worn or broken .-Replace with new belt (see p. 47- 50).
2. P.T.O. lever malfunction -See your authorized HONDA dealer.
Riding mower does not move, or clutch does not engage properly when the
transmission is shifted into gear.
1. Faulty clutch assy. +See your authorized HONDA dealer.
2. Transmission does not -See your authorized HONDA dealer.
shift gear.
3. Abnormal clutch engage- - See your authorized HONDA dealer.
ment.
57