9. Primary belt replacement
CAUTION: Wear heavy gloves to protect your hands when replacing the belt.
1. Remove the cutter deck (see page 34 thru. 36).
2. Remove the primary belt from the pulley on the belt tensioner arm while
pressing out on the arm by hand. Then, remove the primary belt from
the pulley on the engine.
3. Remove the tensioner arm by removing the 10 mm bolt and remove the
primary belt by pulling it out by hand.
4. Install a new primary belt. Install the remaining parts in the reverse order of
removal.
TENSIONER ARM
TENS10
10 km FLANGE BOLT
50