Bag Frame on |
|
Retaining Post | Pin Engaged in Catch |
Handle fully Forward
Discharge Door Closed
G0211
Figure 10
3.Slide the hole in the bag frame onto the retaining post on the discharge tunnel (Fig. 9).
4.Set the rear of the bag frame onto the bag support rod.
5.Pull the discharge door handle forward until the pin clears the catch, and move the handle rearward until the pin locks in the bag notch (Fig. 11).
Pin locked in bag notch
G0212
Figure 11
NOTE: The discharge door in the lawn mower housing is now open.
Mowing with the Grass Bag
WARNING
POTENTIAL HAZARD
♦A worn grass bag could allow small stones and other similar debris to be thrown in the operator’s or bystander’s direction.
WHAT CAN HAPPEN
♦Thrown objects can result serious personal injury or death to the operator or bystanders.
HOW TO AVOID THE HAZARD
♦Check the grass bag frequently. If it is damaged, install a new Exmark replacement bag.
Cut the grass until the bag is full
NOTE: Do not overfill the bag.
Removing the Grass Bag
1.Stop the engine and wait for all moving parts to stop.
-18 -