Honda Power Equipment SLK7000K1

MAINTENANCE & ADJUSTMENTS

Inspect and adjust (if needed) the alignment of the sulky’s wheels every 300 hours of operation.

Inspection

1. Position the machine on a flat, level surface.

Remove the ignition key and disconnect the

spark plug cap(s).

2. Move the sulky into a straight line directly behind

the commercial mower. Don’t use the tires as a

point of reference, but use the centerline of the

sulky instead.

3. Stand behind the sulky and look at the position

of the sulky’s wheels in relation to the back

wheels of the commercial mower.

4. If the sulky’s wheels are not parallel to the back

wheels of the commercial mower, adjust the

alignment.

5. Disconnect the steering rod from the right

bracket. Use a 3/4” wrench to loosen the jam nut

on the end of the steering rod.

6. If the sulky’s wheels are pointing to the right (as

shown in this illustration) turn the sleeve

assembly to lengthen the steering rod .

7. If the sulky’s wheels are pointing to the left, turn

the sleeve assembly to shorten the steering rod.

- I- -i_ 1 -\

SLEEVE ASSEMBLY \

8. Turn the sleeve assembly so the socket aligns

with the ball joint on the right side bracket.

Tighten the jam nut. Connect the steering rod to

the ball joint and recheck the alignment. Adjust

the length of the steering rod again if necessary.

STEERING ROD

SLK7000Kl SULKY