ASSEMBLY
5.
6.
7.
8.
Using two l/2 x l-1/2” hex bolts, l/2” flat
washers, and four l/2” flange nuts, assemble
(don’t tighten) the sulky hitch bracket (curved
side up) to the left and right support brackets as
shown.
Using two 3/8 x 1” hex bolts and two 3/8”
flange nuts, install (don’t tighten) the
diagonal support to the predrilled holes in
the engine platform.
Use two l/2 x l-1/4” bolts l/2” flat washers,
and two l/2” flange nuts to install the other
end of the diagonal support bracket to the
sulky hitch bracket.
Tighten all 3/8” hardware to a torque of
31 ft-lbs. (42 N-m). Tighten all l/2” hardware
to a torque of 76 ft-lbs (103 N-m).
l/2” LOCK NUT (2)
112” FLAT WASHER (
HITCH BRACKET
BOLT (2)
I-LANCIC
BOLT (2)\
BOLT (2)
3/6” FLANGE NUT (2) DIAGONAL
SUPPORT
SLK7000Kl SULKY 23 I