Honeywell 1200g Activate Defaults, Activate Defaults, Remove Custom Defaults, Remove Custom Defaults, Activate Custom Defaults, Activate Custom Defaults

Resetting the Custom Defaults

If you want the custom default settings restored to your scanner, scan the Activate Custom Defaults bar code below. This resets the scanner to the custom default settings. If there are no custom defaults, it will reset the scanner to the factory default settings. Any settings that have not been specified through the custom defaults will be defaulted to the factory default settings.

Activate Custom Defaults

Resetting the Factory Defaults

! This selection erases all your settings and resets the scanner to the original factory defaults.

If you aren’t sure what programming options are in your scanner, or you’ve changed some options and want to restore the scanner to factory default set- tings, first scan the Remove Custom Defaults bar code, then scan Activate Defaults. This resets the scanner to the factory default settings.

Remove Custom DefaultsActivate Defaults

The Serial Programming Commands, beginning on page 9-1list the factory default settings for each of the commands (indicated by an asterisk (*) on the programming pages).

1 - 6