Honeywell 1200g Manual Activation Mode, End Manual Activation After Good Read, In-Stand, Out-of-Stand, Out-of-Stand, Out-of-Stand, Presentation Mode, CodeGate Out-of-Stand

Presentation Mode with CodeGate® Out-of-Stand: When the scanner is not in the stand, it automatically detects bar codes and decodes them. However, the data is not transmitted until you press the button. The laser remains on briefly after the transmission. (If you are accustomed to a Voyager 9540, this setting is the same as the 9540’s default.)

Presentation ModeOut-of-StandPresentation Mode withCodeGate Out-of-StandManual Activation Mode

In Manual Activation Mode, you must press the button to scan a bar code. The scanner scans until a bar code is read, or until the button is released. Default = Manual Activation Mode Off In-Stand, Manual Activation On Out- of-Stand.

*Manual Activation Mode Off In-StandManual Activation Mode OnIn-Stand

Manual Activation Mode Off

Out-of-Stand

* Manual Activation Mode On

Out-of-Stand

End Manual Activation After Good Read

After a bar code is successfully read, the laser can be programmed either to remain on and scanning, or to turn off. When End Manual Activation After Good Read is enabled, the laser turns off and stops scanning after a

3 - 9