good read. If you scan Do Not End Manual Activation After Good Read, the laser remains on after a good read, but the button must be pressed to scan the next bar code. Default = End Manual Activation After Good Read.

Do Not End Manual Activation

After Good Read In-Stand

* End Manual Activation After

Good Read In-Stand

Do Not End Manual Activation

After Good Read Out-of-Stand

* End Manual Activation After

Good Read Out-of-Stand

Manual Activation Laser Timeout - Button Settings

You can set a timeout for the length of time the laser remains on and attempting to decode bar codes when the button is held down, and after it is released. Set the length (in milliseconds) for a timeout by scanning one of the bar codes below, then setting the timeout (from 1-65535 millisec- onds) by scanning digits from the Programming Chart, then scanning Save. Default = Button Hold In-Stand 5000 ms, Button Hold Out-of-Stand 30000 ms, Button Release In or Out-of-Stand 0.

Laser Timeout - Button Hold

In-Stand

Laser Timeout - Button

Release In-Stand

Laser Timeout - Button Hold

Out-of-Stand

Laser Timeout - Button

Release Out-of-Stand

3 - 10