Honeywell 1200g Inter-ScanCode Delay, Save, Mode On, Numeric Keypad Mode:, Inter-ScanCode Delay, Numeric Keypad Mode On, * Numeric Keypad Mode Off

Default = Control + ASCII Mode Off.

Windows Mode Control + ASCIIMode On* Control + ASCII Mode OffDOS Mode Control + ASCII Mode

On

Windows Mode Prefix/Suffix Off

Numeric Keypad Mode: Sends numeric characters as if entered from a numeric keypad. Default = Off.

Numeric Keypad Mode On* Numeric Keypad Mode OffInter-Scan Code Delay

When your keyboard detects that any key is being pressed, released, or held down, the keyboard sends a packet of information known as a “scan code” to your computer. This selection allows you to adjust the delay between scan codes. Set the length (in milliseconds) for a delay by scanning the bar code below, then setting the delay (from 1-30) by scanning digits from the Programming Chart, then scanning Save. Default = 0 (800 µs).

Inter-Scan Code Delay

2 - 17