Honeywell 1250G manual 210

Selection	Setting	Serial Command	Page
		# Indicates a numeric
	* Indicates default
		entry
MSI Check Character	*Validate Type 10,	MSICHK0	6-59
	but Don’t Transmit
	Validate Type 10 and	MSICHK1	6-59
	Transmit
	Validate 2 Type 10	MSICHK2	6-59
	Chars, but Don’t
	Transmit
	Validate 2 Type 10	MSICHK3	6-59
	Chars and Transmit
	Validate Type 10	MSICHK4	6-59
	then Type 11 Char,
	but Don’t Transmit
	Validate Type 10	MSICHK5	6-59
	then Type 11 Char
	and Transmit
	Disable MSI Check	MSICHK6	6-59
	Characters
MSI Redundancy	Range (0 - 10) *0	MSIVOT##	6-59
MSI Message Length	Minimum (1 - 80) *3	MSIMIN##	6-60
	Maximum (1 - 80)	MSIMAX##	6-60
	*80
Plessey Code	Default All	PLSDFT	6-60
	Plessey Code
	Settings
	Off	PLSENA0	6-60
	*On	PLSENA1	6-60
Plessey Check Char.	*No Check Char.	PLSCHK0	6-61
	Validate, But Don’t	PLSCHK1	6-61
	Transmit
	Validate,	PLSCHK2	6-61
	and Transmit
Plessey Redundancy	Range (0 - 10) *0	PLSVOT##	6-61
Plessey Message	Minimum (1 - 80) *3	PLSMIN##	6-61
Length
	Maximum (1 - 80)	PLSMAX##	6-61
	*80

9 - 38