Honeywell Bioptic Aux Port Configuration

Scan the following Plug and Play code to program the scanner for a Honeywell bioptic scanner auxiliary port configuration. This bar code sets the baud rate to 38400 bps and the data format to 8 data bits, no parity, 1 stop bit. Character RTS/CTS with timeout and 232 ACK/NAK are also enabled.

Honeywell Bioptic Settings

Datalogic™ Magellan© Bioptic

Aux Port Configuration

Scan the following Plug and Play code to program the scanner for a Datalogic Magellan bioptic scanner auxiliary port configuration. This bar code sets the baud rate to 9600 bps and the data format to 8 data bits, no parity, 1 stop bit.

Datalogic Magellan Bioptic Settings

NCR Bioptic Aux Port Configuration

Scan the following Plug and Play code to program the scanner for an NCR biop- tic scanner auxiliary port configuration. This bar code sets the baud rate to 9600 bps and the data format to 7 data bits, Even parity, 1 stop bit and Message RTS/CTS with timeout. The following prefixes are programmed for each sym- bology:

Symbology

Prefix

Symbology

Prefix

 

 

 

 

UPC-A

A

Code 39

B1

UPC-E

E0

Interleaved 2 of 5

B2

EAN-8

FF

All other bar

B3

 

 

codes

 

EAN-13

F

 

 

NCR Bioptic Settings

2 - 10