USER MENU
For access to the menu options enter your user code then press the ent key. The keypad then displays the menu options available to the user.
Menu Option
No | Option |
|
|
01 | Omit |
|
|
02 | Chime |
|
|
03 | Walk |
|
|
04 | Codes |
|
|
05 | Test |
|
|
09 | Log |
|
|
10 | Time |
|
|
Table 2: Menu Options.
The user menu offers a selection of up to seven options. All users have access to the Chime and Walk options. The Omit and Codes options are assigned to users, (if required) by the installer.
The system manager (User 14) can also:
•test outputs (Bells and Strobe only)
•view the Event Log
•modify the Time options.
Note: The keypad returns to the normal display if no key press occurs for two minutes while accessing the menu.
The menu options are described in the following pages.
Option 1 – Omit
This option allows authorised users to omit engineer enabled zones from the system. Once a zone has been omitted it is not able to generate an alarm condition. Omitted zones are rein- stated automatically the next time the system is unset or manually when the Omit feature is disabled by the user.
Selecting the Omit Option
Enter your user code and press the ent key to select the menu options. Press the ent key again to select Omit.
7