QUICK OPERATION GUIDE
Enter your user code then select
ASET (an Unset system)
BPART SET (Defaults to Parts 1 and 2)
1 key • toggles the Set (ON)/Unset (OFF) status of Part 1 2 key • toggles the Set (ON)/Unset (OFF) status of Part 2 3 key • toggles the Set (ON)/Unset (OFF) status of Part 3
ent | UNSET (a Set system) |
1OMIT ZONES
A or B key to view zones
#to change omit status of zone (must be an omittable zone) ent key to accept programming and start setting
esc key to accept programming without setting
2CHIME ZONES
A or B key to view zones
#key to enable/disable chime function on zone
ent key to accept esc key to cancel
3WALK TEST
A or B key to view zones
#key to enable/disable Walk Test function on zone ent key to start Walk Test
#key to toggle display between open and tested zones esc key to end Walk Test
Note: Zones number 10 to 16 will be displayed as A to G
4(ASSIGNING) USER CODES A or B key to select user (1 – 14) ent key to program code
number keys to enter digits, ¸ key to delete digits ent key to accept programming, esc to cancel
5TEST OUTPUTS
A or B key to select output for test
#key to enable/disable test function on zone
esc key to end test
9LOG
A key to step forwards through events B key to step backwards through events
# key to display event date
esc key to exit Log
ent+B TIME
To access the Time option, enter your user code, press the ent key, the B key and then the ent key.
Then press the:
•1 key to select Time (hh/mm)
•2 key to select Date (dd/mm/yy)
•3 key to select Start Summer (dd/mm)
•4 key to select End Summer (dd/mm).
Press the ent key to accept the programming for each option, or the esc key to cancel.
vii
