Honeywell 17005 owner manual CustomizeProgramCyclesContd

CustomizeProgramCycles(Cont'd)

To run TWO customized ON/OFF cycles in a 24 hour period (PG2):

NOTE: You are unable to set the OFF time to be the same as the ON time. The P2-ON time must be set for after the P1-OFF time.

•Press the SET Button and hold for 3 seconds to activate the time function. Move through programming functions until PG2 and P1-ON appear. The clock and program speed icons will appear (Fig. 5a).

•Adjust the time using the hours and minutes button (up for hours, down for minutes). This is the time that the machine will turn ON for the first ON/OFF cycle.

•Adjust the desired speed setting using the SPEED button.

•Press the SET button until PG2 and P1-OFF appear. The speed icon will disappear (Fig. 5b).

•Adjust the time using the hours and minutes button. This is the time that the machine will turn OFF for the first ON/OFF cycle.

•Press the SET button until PG2 and P2-ON appear. The speed icon will appear. (Fig. 5c).

•Adjust the time using the hours and minutes button. This is the time that the machine will turn ON for the second ON/OFF cycle.

•Adjust the desired speed setting using the SPEED button.

•Press the SET button until PG2 and P2-OFF appear. The speed icon will disappear. (Fig. 5d).

•Adjust the time using the hours and minutes button. This is the time that the machine will turn OFF for the second ON/OFF cycle.

•Continuously press SET button until you exit set time mode.

•Press the PROGRAM button until PG2 appears. Unit will automatically operate per your settings.

NOTE: When a program function is running (pre-set or customized program cycles), you may override the speed setting; the unit will continue with its programmed function once it reaches the next programmed time.

Fig. 5a Fig. 5b

Fig. 5c Fig. 5d