![](/images/backgrounds/161148/161148-20821x1.png)
USB Serial
Scan the following code to program the scanner to emulate a regular
Note: No extra configuration (e.g., baud rate) is necessary.
CTS/RTS Emulation
CTS/RTS Emulation On* CTS/RTS Emulation OffACK/NAK Mode
ACK/NAK Mode On* ACK/NAK Mode OffRemote MasterMind™ for USB
When using a USB interface, you may wish to configure your scanner to communicate with Remote MasterMind Scanner Management Software (ReM). Scan the ReM On bar code to communicate with ReM. To disable this capability, scan ReM
Off. Default = ReM On.
ReM Off* ReM On2 - 3