Honeywell 3310G Input/Output Settings, Off, Scanner, Scanner, Beep on BEL On, Beep on BEL On, *Beep on BEL Off, Trigger Click On, Trigger Click On, Trigger Click Off

Input/Output Settings

Power Up Beeper

The scanner can be programmed to beep when it’s powered up. Scan the Off bar code(s) if you don’t want a power up beep.

Default = Power Up Beeper On - Scanner.

Power Up Beeper Off -

Scanner

* Power Up Beeper On -

Scanner

Beep on BEL Character

You may wish to force the scanner to beep upon a command sent from the host. If you scan the Beep on BEL On bar code

below, the scanner will beep every time a BEL character is received from the host. Default = Beep on BEL Off.

*Beep on BEL OffBeep on BEL On

Trigger Click

To hear an audible click every time the scanner button is pressed, scan the Trigger Click On bar code below. Scan the Trigger Click Off code if you don’t wish to hear the click. (This feature has no effect on serial or automatic triggering.) Default = Trigger

Click Off.

*Trigger Click Off

[

Trigger Click On

3 - 1