Honeywell 5610/5613, 5680/5683, 5690/5693 < Default All Aztec Code Settings, Aztec Append, Aztec Code Page, Aztec Code On/Off, Aztec Code Message Length

Aztec Code

< Default All Aztec Code Settings >

Aztec Code On/Off

* On

Off

Aztec Code Message Length

Scan the bar codes below to change the message length. Refer to Message Length Description (page 6-1)for additional

information. Minimum and Maximum lengths = 1-3832. Minimum Default = 1, Maximum Default = 3832.

Minimum Message Length

Maximum Message Length

Aztec Append

This function allows the scanner to append the data from several Aztec bar codes together before transmitting them to the host computer. When the scanner encounters an Aztec bar code with the append trigger character(s), it buffers the number of Aztec bar codes determined by information encoded in those bar codes. Once the proper number of codes is reached,

the data is output in the order specified in the bar codes. Default = On.

* On

Off

Aztec Code Page

Aztec Code pages define the mapping of character codes to characters. If the data received does not display with the proper characters, it may be because the bar code being scanned was created using a code page that is different from the one the host program is expecting. If this is the case, scan the bar code below, select the code page with which the bar

6 - 42