Honeywell 5610/5613, 5680/5683, 5690/5693 2D Reread Delay, Lights On, Lights Off, Lights Off, * Lights On, Long (3000ms), Short (1000ms), Medium (2000ms), 2D Reread Delay Off, Extra Long (4000ms)

2D Reread Delay

Sometimes 2D bar codes can take longer to read than other bar codes. If you wish to set a separate Reread Delay for 2D bar codes, scan one of the programming codes that follows. 2D Reread Delay Off indicates that the time set for Reread

Delay is used for both 1D and 2D bar codes. Default = 2D Reread Delay Off.

* 2D Reread Delay OffShort (1000ms)Medium (2000ms)Long (3000ms)Extra Long (4000ms)

Illumination Lights

If you want the illumination lights on while reading a bar code, scan the Lights On bar code, below. However, if you want to turn just the lights off, scan the Lights Off bar code. Default = Lights On.

Note: This setting does not affect the aimer light. The aiming light can be set using Aimer Mode (page 3-10).

* Lights OnLights Off

3 - 9