Honeywell 5610/5613, 5680/5683, 5690/5693 User-SpecifiedReread Delay, Save, Save, Time-Out, Hands Free, Short (500 ms), Long (1000 ms), * Medium (750 ms), Hands Free Time-Out, Extra Long (2000 ms)

Hands Free Time-Out

The Scan Stand and Presentation Modes are referred to as “hands free” modes. If the scanner’s trigger is pulled when using a hands free mode, the scanner changes to manual trigger mode. You can set the time the scanner should remain in manual trigger mode by setting the Hands Free Time-Out. Once the time-out value is reached, (if there have been no further trigger pulls) the scanner reverts to the original hands free mode.

Scan the Hands Free Time-Outbar code, then scan the time-out duration (from 0-300,000 milliseconds) from the inside back cover, and Save. Default = 5,000 ms.

Hands Free Time-Out

Reread Delay

This sets the time period before the scan engine can read the same bar code a second time. Setting a reread delay protects against accidental rereads of the same bar code. Longer delays are effective in minimizing accidental rereads. Use shorter delays in applications where repetitive bar code scanning is required. Reread Delay only works when in a Presentation Mode

(see page 3-5).Default = Medium.

Short (500 ms)* Medium (750 ms)Long (1000 ms)Extra Long (2000 ms)User-Specified Reread Delay

If you want to set your own length for the reread delay, scan the bar code below, then set the delay (from 0-30,000 millisec- onds) by scanning digits from the inside back cover, then scanning Save.

User-Specified Reread Delay

3 - 8