INTRODUCTION
Mounting Specifications
Optional Wall/Counter Mount, PN
Item | Description | Qty. |
|
a. | Locking Plate, PN | 1 |
|
|
|
|
|
b. | Base Cover, PN | 1 |
|
|
|
|
|
c. | #7 x 1.00" Wood Screw, PN | 3 |
|
|
|
|
|
d. | M3 x 8 mm Flathead Screw, PN | 4 | Figure 4. Kit Components |
|
|
|
|
1.Drill three #39 pilot holes.
Note the position OrbitCG will rest (see Figure 5). Use the dimensions provided in Figure 5 or the locking plate as a template to drill three #39 pilot holes in the mounting surface.
2. Attach the locking plate to the wall/counter.
Figure 5.
Secure the locking plate to the counter/wall with the three #7 x 1.00" wood screws provided (see Figure 6).
3. Attach the base plate to the OrbitCG.
Secure the base cover to the bottom of OrbitCG using the four M3 x 8 mm screws provided (see Figure 7).
4. Mount OrbitCG to the locking plate.
Hold OrbitCG 90° clockwise from the desired position then lower it over the locking plate until it sits flush to the countertop. Twist OrbitCG counter clockwise 90° to lock the scanner in place (see Figure 8).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Figure 6. | Figure 7. |
| Figure 8. | |
6