INSTALLATION

RS485

1.Turn off the host device.

2.Plug the male 10-pin RJ45 end of the MVC cable into the

10-pin socket on the 7180.

3.Connect the other end of the MVC cable to the host device.

4.Turn on the host device.

Figure 10.

When the scanner first receives power, the blue and white LED will toggle on and off then the scanner will beep once.

Plugging the scanner into the port of the PC does not

guarantee that scanned information will appear at the PC. A software driver and correct configuration setting are also required for proper communication to occur.

8