Powering the Dolphin Terminal

When seated in a base that is connected to the appropriate power source, the Dolphin terminal receives the power to charge its main battery and run its internal circuitry. Keep the base plugged into the power source so that the Dolphin terminal battery pack stays fully charged.

For more information about powering the base, see Power on page 13-6.

Charging the Dolphin Terminal

The base supplies charging power to the Dolphin terminal so that the terminal can monitor the charging of its battery pack. This charging method protects the battery from being damaged by overcharging. Therefore, the Dolphin terminal may be stored indefinitely in the base without damage to the terminal, the battery pack, or the base.

1.Insert a battery pack into the terminal.

2.Slide the terminal, imager window up and the LCD visible, into the terminal well until it stops.

3.When the terminal is properly seated, the DOCK LED on the base illuminates solid green. The terminal begins charging automatically.

13 - 4