Honeywell 9700 Mode, Hands-Free, Audio Modes, Handset Mode, Voice Communication, Enabling the GSM Radio, Tap Start > Settings > Connections > Dolphin Wireless Manager

Enabling the GSM Radio

By default, the GSM radio is not enabled after a hard reset. Verify the status of the radio in the Dolphin Wireless Manager.

Tap Start > Settings > Connections > Dolphin Wireless Manager .

If the Phone is set to OFF, tap the Phone rectangle and the GSM radio enables.

Voice Communication

You can use the Dolphin terminal as a phone over the GSM radio.

Audio Modes

The front panel of the 9700 contains both a speaker and a microphone that you can use to send and receive audio signals over the GSM network, see Front Panel: 9700 on page 3-4.

There are two audio modes:

Handset Mode: The front speaker is used for receiving handset voice calls and the front panel microphone provides audio input to the terminal.

Hands-Free Mode: Hands-free mode is when you use the rear speaker as a speakerphone. To switch to

speakerphone, tap on the speaker button in the Dialer window.

9 - 4