Mounting

The adjustable mounting bracket holds the terminal securely in place and gives the user a variety of options for mounting the base. When selecting a location, keep in mind that the power supply and serial connectors point straight out the bottom panel.

1.Loosen the turnscrew.

2.Insert the ball joint of the mounting bracket to the back of the bracket.

3.Insert the ball joint on the back of the base into the other side of the bracket.

4.Tighten the turnscrew to secure both ball joints.

5.Secure the mounting bracket to the appropriate location.

Latch (not in view)

Spring Arm Assembly

Bracket

Base

Mounting Bracket

 

Turnscrew

Power supply and RS232

Ball Joint

Ball Joint

connectors (not in view)

Back Panel

Latch

The latch sits on top of the spring arm assembly and holds the back of the terminal securely in place.

Spring Arm Assembly

The spring arm assembly is the column that connects the latch to the back of the base.

Ball Joints

There are two ball joints: one on the back of the base and one on the mounting bracket. Both ball joints are inserted into the bracket and secured to mount the base.

Connectors

The power and RS232 connectors are located on the bottom panel.

For more information, see Bottom Panel on page 13-3.

13 - 5