Charging Terminals

The main battery of each terminal charges in 4 hours. The intelligent battery charging system incorporated into all Dolphin terminals prevents overcharging, which means that Dolphin terminals may be seated in the base indefinitely without damage to the terminals, battery packs, or the base.

1.Power the base; see Supplying Power on page 14-3.

2.Slide the Dolphin into the terminal well. When the terminal is seated properly the Dock LED lights green. The Charge LED lights green indicating the terminal is being charged.

Mounting

This base should be mounted to a dry, stable surface. When choosing a location, always bear in mind that

•The mounting location must allow users easy access to the power connector.‘

•The base should be oriented so that users can easily see the LEDs.

Bottom Panel

DIN Rail Slot

Rubber Feet

Desk Mounting

The DIN Rail (7.5 X 35 mm) slot on the bottom panel enables secure mounting.

Installation Hardware

Screw:

3/16 in. dia x 5/8 in. long pan head screw

Washer:

1/2 in. OD x 7/32 in. ID x 3/64 in. thick

Nut:

3/16 in. dia

1.Slide the DIN Rail into the DIN Rail slot on the bottom panel.

2.Turn the base and DIN Rail right side up.

14 - 4